Line-Interactive UPSs feed the computers and electronic devices connected to them with electricity directly from the grid. When the voltage coming from the network drops or rises, it provides electricity at the appropriate voltage to the loads it is connected to through the transformer inside. When the power goes out, it feeds the loads connected to the UPS from its battery.
Lite II is equipped with a high-speed CPU to perform all its functions accurately and on time. High speed CPU, safe operation of UPS; It manages overload, overvoltage and undervoltage protections. Thus, Lite II gains unmatched reliability.
Thanks to the many electronic protection features of Lite II, its lifespan is extended. For example; If you accidentally overload your Lite II, it automatically detects the load and protects itself by shutting down before any damage occurs. Likewise, it also provides protection against low and high voltage.
Lite II also serves as a voltage regulator thanks to its transformer that operates in a wide voltage range. If the voltage coming from the network is too high or low, it provides the most appropriate voltage to the loads it is connected to by optimizing the voltage.
To charge the batteries, simply plug the Lite II into an outlet.
During a power outage, if the Lite II shuts down by draining its battery, it will automatically start up again and start charging its batteries when the power is restored.
Lite II has the ability to be operated directly from batteries even when there is no mains electricity.
Lite II produces simulated sine waves suitable for computers and electronic devices.
While many UPSs can only charge their batteries in 8-10 hours, Lite II charges its batteries in approximately 4 hours, ensuring safe use in regions where power outages occur frequently.
|Product Name||Lite II 650VA|
|Capacity||650VA / 360W|
|Display Type||LED Panel|
|Alarm||Battery Mode, Low Battery, Overload, Error|
|Input voltage||220 / 230 / 240 VAC|
|Input voltage range||162-265 VAC|
|Frequency||50 / 60 Hz ± 10%|
|Output voltage||220 VAC|
|Output voltage range||± 10%|
|Frequency range (Synchronous mode)||50 / 60 Hz ± 4%|
|Frequency range (Battery mode)||50 ± 0.25 Hz - 60 ± 0.3 Hz|
|Transfer time||2 - 6 ms, 10 ms max.|
|Output socket||2 x Schuko|
|Type & quantity||12V 7Ah|
|Charging time||4-6 hours up to 90% capacity|
|Charging voltage||14.0 VDC|
|LED Indicator||Operation from mains, Operation from battery, Error status|
|Alarm||Battery mode, Low battery, Overload, Error|
|D x W x H (mm)||322 x 122 x 160|
|Net weight (kg)||4.5|
|Humidity||20-90% relative humidity (non-condensing)|
|Noise level||< 40 dBA|
|Note||Tunçmatik A.Ş. has the right to make changes to the above mentioned features without notice. Tunçmatik A.Ş. due to typographical errors. is not responsible.|